Air quality detector can accurately detect indoor air quality. Adopting the high-precision electrochemical formaldehyde sensor and American "TEMTOP" laser particle sensor, it can directly transform the concentration of pollutants in the air into visual data and provide air quality for you to effectively safeguard the health of your family
1. Featuring a large LCD display and is easy to operate. Just a glance, PM2.5, PM10, CO2, temperature and humidity info can be easily seen on the screen.
2. Tabletop or Wall Mounted: There is
3. Advanced Sensors. We keep the most important and essential parts for a good air quality monitor - high accurate for testing! We adopting particle laser sensor, humidity and temperature sensor, TVOC and HCHO
Application Scope: At home, office, cab, etc.
Name: M1000 Air quality detector
Display mode: LCD screen
Battery voltage: 3.7VDC
Overall dimension: 260*139*33mm
Output voltage: DC5V
Output current: 0.5-1A
Temperature range: 0-50.C
Humidity range: 0-90% RH
Atmospheric pressure condition: 1atm
Measurement index and range:
Formaldehyde measurement technical index
TVOC measurement technical index
Resolution: 0.001 mg/m³
PM2.5 measurement technical index
Range: 0-999 mg/m³
PM10 measurement technical index
Range: 0-999 mg/m³
Health standard index:
1. Turn on/off the detector
Press and hold the power button for 2
2. Set the detection interval
In order to extend the service life of the product, it will enter the intermittent detection mode after 30 minutes of operation. In this mode, the sensor will work intermittently and the detection interval will be 5 to 30 minutes adjustable. When any key is pressed, the mode is automatically exited and held for 30 minutes. The detection setting method is as follows Short Press SET" button to enter setting mode when instrument is on, the LCD interface display preset time interval, press "+" button, the interval time adds minutes; press "-" key, the interval time minus 5 minutes Short press "SET" button again, the instrument will exit interval time setting mode and save the current settings.
3. Detect the concentration of Formaldehyde, TVOC, PM2.5
4. Power indication
The detector has the function of testing the battery power. When the battery is low. Please charge.
- The sensor used to detect PM2.5, PM10 and particles
- Do not put the detector in the environment where the concentration of PM2.5 is more than 500ug /m³, Co2 is over 5000ppm and that of formaldehyde is over 1.0mg/m³ for
- Please put the detector in a ventilated environment for 6 hours when you use it for the first time to avoid the influence of micro interfering gas inside the package.
- Avoid using the detector in
- Avoid bump, strike and drop Do not cover the detection port and air outlet port when using the detector.
- Be cautious of cross interference.
1. A confirmation email with all your order details will be sent to you once your order is received. And we will begin processing your order very soon.
2. A tracking number will be sent to you by e-mail once items shipped out.
3. Shipping details please check below.
Free Shipping in USA.
Fedex Overnight in USA: Please place order by 1pm PST for Overnight Service or else shipment will be ship on the next day.
Worldwide Shipment: We ship the products to all over the world. The shipping cost may vary due to countries and shipping cost.
After receiving the item and if there is any quality problem, please contact us within 30 days. Product (sets) should be complete and with no damage. Refund will be issued as money back or product replacement. Buyer pays return shipping, thanks.
For specific operation, please shoot an email to our service personnel at:email@example.com. We will respond within 24 hours, thank you.
showing reviews from (% reviewsData.reviews.from %) to (% reviewsData.reviews.to %)
No Review Found.
0 Question Asked
showing questions from (% questionsData.questions.from %) to (% questionsData.questions.to %)
No Question Found.